Laboratory of Wood Processing<br>Division of Forestry and Biomaterials Science<br>Graduate School of Agriculture, Kyoto University

京都大学大学院 農学研究科
森林科学専攻 林産加工学分野

Publications (Before 2000)

Books and Reviews

1999

  • Y.Fujii:Fair report '17th Osaka Wood Technology Fair', Mokuzai-Kogyo, 54(2), 83-85, (1999)
  • Y.Fujii: Technical report 'Detection of termite attack using AE monitoring, Guidelines for practical measurements in houses', Pest-control, 106, 32-38, (1999)
  • Y.Fujii: Tour report 'IRG'30 Tour', Mokuzai-hozon, 25(5), 17-21, (1999)

1998

  • S.Okumura: Listening of the sound generated by termite feeding, Ultrasonic TECHNO, 98(8), 21-24, (1998)
  • Y.Fujii: Seminar report "New materials and technologies in wooden house for healthy life", Mokuzai Hozon (Wood Preservation), 24(2), 21-24, (1998)
  • Y.Fujii: Science of Dwelling and Wood 1. Wood in our Living, J. of the Japan Res. Assoc. for Textile End - uses, 39(3), 10-15, (1998)

1997

  • Yoshihisa FUJII: Application of AE monitoring to forest products research, Mokuzai Gakkaishi43(10), 809-818, (1997)

1995

  • Y.Fujii: Machining of structural timbers for rationalizing and reducing in the cost of house building (in Japanese), The Woodworking Machinery Graphic. 95/03, 74-77, (1995)
  • Y.Fujii: Dust (in Japanese), Nihon Mokuzai Gakkai Dai-4ki Kenkyu Bunkakai Hokokusho (Report of the Research Working Groups in the 4th Term, The Japan Wood Research Society). p.III-10 - III-27, The Japan Wood Research Society, Tokyo, (1995)
  • S.Okumura: Report on the International Symposium on the Utilization of Fast-Growing Trees (in Japanese), Wood Industry 50(3), 127-130, (1995)

1994

  • S.Okumura and Y.Fujii: Sawmilling - Textbook for Unskilled Workers in Sawmilling Industry (in Japanese), pp.229, Wakayama Prefectural Federation of Lumber Associations, Wakayama, (1994)
  • Y.Sawada: Wood and Environment (in Japanese), p.137-151, Kaiseisha, Ohtsu, (1994)
  • Y.Fujii: Identification of woodworking conditions using pattern recognition (in Japanese), Wood Working Machinery No.164, 5-10, (1994)
  • Y.Fujii: Pattern recognition of cutting sound and its application to the in-process monitoring of wear (in Japanese), Wood Industry 49(7), 300-305, (1994)

1993

  • Y.Fujii (contributing author): Glossary of Terms Relating to Wood Milling and Machining (in Japanese), edited by Editorial Committee for Glossary, Division on Milling and Machining in Wood Technological Association of Japan, Bun-eido, Tokyo, pp.185, (1993)
  • S.Okumura (contributing author, editorial member): Glossary of Terms Relating to Wood Milling and Machining (in Japanese), edited by Editorial Committee for Glossary, Division on Milling and Machining in Wood Technological Association of Japan, Bun-eido, Tokyo, pp.185, (1993)
  • S.Okumura: Part I, Chap. 3. Development of sawmilling machines (in Japanese), In The History of Lumber Industry in Wakayama Prefecture edited and published by Wakayama Prefectural Federation of Lumber Associations, p.76-108, (1993)
  • Y.Fujii: Report on the 11th Wood Machining Seminar (in Japanese), APAST No.9, 24-25, (1993)
  • Y.Fujii and S.Okumura (supervisors): Band saw filing for sawmills (videotape with Japanese explanation, produced by Wakayama Prefectural Federation of Lumber Associations), (1993)
  • S.Okumura: Report on research meetings on woodworking in Germany and Norway (in Japanese), Wood Industry 48(10), 477-480, (1993)
  • S.Okumura: Thermographic study on temperature of tool-chip-work system in wood cutting (in Japanese), Report of 1992 FY Research Project by Grant-in-Aid for Scientific Research (C) from the Ministry of Education, Science and Culture. pp.30, (1993)

1992

  • Okumura, S. (contributing author, editorial member):Mokuzai Kagaku Ryakugo Jiten (Abbreviations and Symbols in Wood Science)(in Japanese) edited by Division on Wood and Wood Based Materials in the Society of Materials Science, Japan, Kaiseisha, Ohtsu, pp.360, (1992)
  • Okumura, S.:Sessaku to Netu (Machining and Heat) (in Japanese). In Mokuzai Kagaku Koza 6. Sessaku Kako (Lectures on Wood Science 6. Machining), Tanaka, C. and Kitayama, S. eds., p.26-32, Kaiseisha, Ohtsu, (1992)
  • Fujii, Y.:Wood and wooden house in German (in Japanese). Ju-Science 19(8), 83-87, (1992)

Original Papers

Top of page ↑

1999

  • Y. Yanase, Y. Fujii, S. Okumura, Y. Imamura and M. Kozaki: Detection of Termite Attack in Wooden Buildings Using AE Monitoring. -A Case Study at a House of Wooden Panel-. Japan J. of Environ. Entmol. Zool., 10(4), 160-168, (1999)
  • N. Yamada, Y. Fujii, S. Okumura, Y. Tanigchi: Estimation of Drying Stresses in Hollowed Log using Finite Elemen Method I. -The linear finite element analysis of the drying stress were substituted by the thermal stress.- Mokuzai Gakkaishi, 45(5), 403-408, (1999)

1998

  • B. Porankiewicz, S. Okumura: Theoretical analysis of temperature between surface of cemented carbide and wood during high speed contact. Roczniki Akademii Rolniczej w Poznaniu -CCC, Technol. Drewn., 32, 11-20, (1998)
  • Y. Fujiwara, K. Inui, Y. Fujii, Y. Sawada and S. Okumura: An approach to the three-dimensional evaluation of surface roughness of wood. Relationship between the distribution of peaks on the surface and tactile roughness. Mokuzai Gakkaishi, 44(6), 447-451, (1998)
  • Y. Imamura, A. Adachi and Y. Fujii: Acoustic emission (AE) detected from wood attacked by powder-post beetles Lyctus brunnes STEPHENS., Japan J. of Environ. Entmol. Zool., 9(3), 98-100, (1998)
  • Y. Fujii, Y. Yanase, Y. Imamura, S. Okumura and S. Oka: Detection of termite attack in wooden buildings with AE monitoring. Case study at a traditional Japanese warehouse. Japan J. of Environ. Entmol. Zool.,9(3), 101-105, (1998)
  • Y. Yanase, Y. Fujii, S. Okumura, Y. Imamura and T. Yoshimura: Detection of AE generated by the feeding activity using PVDF(Polyvinylidene fluoride) film. Forest Products J., 48(7/8), 43-46, (1998)
  • S. Naito, Y. Sawada, Y. Fujii and S. Okumura: Thermography of wood specimens in static-bending test. Bull. of the Kyoto Univ. Forest, No.69, 104-113, (1998)

1997

  • Yoshihisa FUJII, Yuji IMAMURA, Eiji IWATSUBO and Shoji YAMAMOTO: Control of termite attack using trapping method and acoustic emission(AE) monitoring.-A case study at an electric power plant-, Wood Preservation, 23(3), 11-20, (1997)
  • Yoshihisa FUJII, Hiroki Nemoto, Yutaka SAWADA, Shogo OKUMURA and Hiroyuki IKEGIWA: Prediction of the concentration of airborne dust in the woodworking chamber I. Time changes of the concentration and distribution of particles in free falling., Mokuzai Gakkaishi, 43(2), 203-209, (1997)
  • Yoshihisa FUJII, Mayumi YOSHIZANE, Shogo OKUMURA: Evaluation of surface roughness by various parameters I. Relationships between several roughness parameters and tactile roughness., Mokuzai Gakkaishi, 43(7), 574-579, (1997)

1996

  • Matsuoka, H., Y. Fujii, S. Okumura, Y. Imamura, T. Yoshimura: Relationship between the type of feeding behavior of termites and the acoustic emission (AE) generation., Wood Research No.83; 1-7, (1996)
  • Kuroiwa, M., S. Okumura, Y. Fujii : A few experiments on acoustic emission during wood drying IV. AE generation during repeated cycles of wetting and drying of wood. Bulletine of the Kyoto University Forests No.68, 151-160, (1996)
  • Okumura, S., R. Suzuki, Y. Fujii : Preliminary Study on Thermography of Wood under Compression Load. Bulletine of the Kyoto University Forests No.68, 161-169, (1996)

1995

  • Fujii, Y., Y. Imamura and T. Yoshimura: Observation of feeding behavior of termite using CCD camera and its relation to the generation of acoustic emission (AE). Wood Research No.82, 47-53, (1995)
  • Imamura, Y. and Y. Fujii: Analysis of feeding activities of termites by AE monitoring of infested wood (in Japanese). WoodPreservation 21(2), 11-19, (1995)

1993

  • Fuketa, T., S. Okumura, M. Noguchi and T. Yamauchi: Application of AE source location to paper materials under tensile deformation. Journal of Acoustic Emission 11(1), 21-26, (1993)
  • Hwang, G.-S., S. Okumura and M. Noguchi: Estimation of bonding strength of wood glued with resorcinol resin after accelerated aging tests using acoustic emissions (in Japanese with English summary). Mokuzai Gakkaishi 39(2), 174-180, (1993)
  • Ohtsuka, H., S. Okumura and M. Noguchi: Acoustic emissions from plywood in shear by tension loading (in Japanese with English summary). Mokuzai Gakkaishi 39(7), 795-800, (1993)
  • Okumura, S., T. Ishii and M. Noguchi: Temperature of rubbing surfaces between a steel rod and wood and wood composites (in Japanese with English summary). Bulletin of the Kyoto University Forests No.65, 339-346, (1993)
  • Xu, Y., S. Okumura and M. Noguchi: Thermographic detection of starved joints of wood (in Japanese with English summary). Mokuzai Gakkaishi 39(5), 544-549, (1993)
  • Yamauchi, T., S. Okumura and M. Noguchi: Application of thermography to the deforming process of paper materials. Journal of Materials Science 28, 4549-4552, (1993)

1992

  • Noguchi, M., R. Ishii, Y. Fujii and Y. Imamura: Acoustic emission monitoring during partial compression to detect early stages of decay. Wood Science and Technology 26, 279-287, (1992)
  • Noguchi, M. and Y. Sawada: Noncontact measurement of shapes of pillars with uneven cross-sections (in Japanese). Wood Industry 47, 319-322, (1992)
  • Okumura, S., K. Hirose and M. Noguchi: A few experiments on acoustic emissions during wood drying III (in Japanese with English summary). Bulletin of the Kyoto University Forests No.64, 209-216, (1992)
  • Hwang, G. S., S. Okumura and M. Noguchi: Estimation of bonding strength of wood glued with urea resin after accelerated aging tests utilizing acoustic emissions (in Japanese with English summary). Mokuzai Gakkaishi 38, 687-692, (1992)

Conference and Seminar Papers

Top of page ↑

1999

  • Y. Fujii, Y. Yanase, T. Yoshimura, Y. Imamura, S. Okumura and M. Kozaki: Detection of Acoustic Emission (AE) generated by termite attack in a wooden house. IRG/WP99-20166,1999
  • Y. Yanase, Y. Fujii, T. Yoshimura, Y. Imamura, S. Okumura and M. Kozaki: Detection of Acoustic Emission (AE) generated by termite attack in a wooden house. Proc. of ICEUPT'99, Chi-Tou, 21-23, May, 1999, 530-537
  • Y. Fujiwara, A. Ishii, Y. Sawada, Y. Fujii and S. Okumura: Novel filtering methods of evaluating surface roughness of wood. Evaluation based on tactile roughness and 3D measurement of surface roughness. Proc. of 14th International Wood Machining Seminar, Epinal, 12-19, September, 1999, 571-580
  • Y. Sawada, H. Matsumoto, Y. Fujii and S. Okumura: Pattern recognition of the grinding sound of bandsaw teeth and its application to the automatic diagnosis of grinding conditions. Proc. of 14th International Wood Machining Seminar, Epinal, 12-19, September, 1999, 767-773
  • Y. Fujii, Y. Sawada, S. Okumura and H. Ikegiwa: Optimization of a dust-collecting system in a woodworking chamber using computer-aided method for predicting the airborne dust concentration. Proc. of 14th International Wood Machining Seminar, Epinal, 12-19, September, 1999,335-344

1997

  • Yoshihisa FUJII, Yuji IMAMURA, Eiji IWATSUBO and Shoji YAMAMOTO: Control of termite attack using a trapping method and acoustic emission (AE) monitoring. A case study at an electric power plant. Int. Res. Group on Wood Preserv. Document No.IRG/WP 97-10224, (1997)
  • Yoshihisa FUJII, Yutaka SAWADA, Shogo OKUMURA, Hiroyuki IKEGIWA and Shigeru KITAYAMA: Prediction of distribution of airborne dust in a woodworking chamber. An approach using experimental and numerical analyses. Proc. 13th Int. Wood Machining Seminar, Vancouver, 1997, p.311-319
  • Yutaka SAWADA, Yoshihisa FUJII and Shogo OKUMURA: Pattern recognition of cutting sound of circular saws and its application to the in-situ diagnoses of cutting conditions. Optimization of pattern vectors using the FE-method. Proc. 13th Int. Wood Machining Seminar, Vancouver, 1997, p.377-385

1995

  • Okumura, S.: A numerical analysis of tool edge temperature in rubbing against wood. Proceedings of the 12th International Wood Machining Seminar, Kyoto, Japan, p.529-537, (1995)
  • Li, H., Y. Fujii, Y. Sawada, S. Okumura and M. Noguchi: Analysis of stress concentration in bandsaw tooth using Finite Element Method. Proceedings of the 12th International Wood Machining Seminar, Kyoto, Japan, p.538-550, (1995)
  • Yamamoto, J., Y. Fujii, S. Okumura and M. Noguchi: The influence of clearance angles of set of a saw tooth on the cutting resistance. Proceedings of the 12th International Wood Machining Seminar, Kyoto, Japan, p.551-559, (1995)
  • Fujii, Y., Y. Sawada and S. Okumura: Pattern recognition of cutting sound with RCE-network algorithm. Feasibility of Wigner distribution as a pattern. Proceedings of the 12th International Wood Machining Seminar, Kyoto, Japan, p.552-569, 1995
  • Ikegiwa, H., S. Harima, Y. Fujii and S. Okumura: Characteristics of particles produced in routing of wood based materials. Proceedings of the 12th International Wood Machining Seminar, Kyoto, Japan, p.240-254,(1995)

1993

  • Okumura, S., S. Nanba and M. Noguchi: Thermographic temperature measurement of tool-chip-work system in slow-speed wood cutting. Proceedings of the 11th International Wood Machining Seminar, Honne, Norway. p.41-55, (1993)
  • Fujii, Y., T. Fuketa, Y. Arashi, S. Okumura and M. Noguchi: Pattern recognition of cutting sound from woodworking tools and its application to the in-process monitoring of wear. Machining Seminar, Honne, Norway. p.147-156, (1993)

1992

  • Fujii, Y., Y. Imamura, M. Shibata, R. Ishii, M. Noguchi: Feasibility of AE (Acoustic Emission) monitoring for the detection of the activities of wood destroying insects. The International Research Group on Wood Preservation. Document No. IRG/WP/2416, (1992)